Resin For Road Marking Coating
Resin For Road Marking Coating has two characters, firstly, fast drying, secondly, good durability. As acrylic character, this coating resin naturally has good weather resistance.
Acrylic resin Property:
Appearance White powder
Solid Content(％) 100
Softening Point(℃) 123
Acid Value(mgKOH/g) 26
Viscosiy(mpa.s) 250-450(37.5%in Toluene)
Soluble:Ester,Ketone and Aromatics.
Insoluble:200# Gasoline and Alcohol.
1. Good adhesion and flexibility
2. Good dispersivity and leveling
3. Good chemical,water and alcohol resistance
4. Good compatibility with Chlorinated rubber or High Chlorinated Polyethylene
1. Road Marking Paint
2. Exterior Coating
3. Industrial Coating
Store in its original packing at the place where is dry and installed with ventilation eduipment
It contains a single component
Mix the road marking paint very well before use. Dilute it till the required viscosity. Mix well if deposit or agglomeration occurs in the product before construction. Avoid its contact with other thinner. Spray or brush it.
Road surface preparation: Oil, dirt, dust and water is removed from the road surface to be painted. The surface must be kept clean, and dry
Reference Formula for Normal Temperature Road Marking Paint
White Paint at Normal Temperature
Yellow Paint at Normal Temperature
Medium Chrome Yellow
Precipitated Barium Sulfate(325 mesh)
Coarse Whiting(400-600 mesh)
First, add 2, 3, 4, (measure accurately) into disperse tank, turn on high speed dispersion machine
300 rotate/min, add into No.1 slowly, increase the dispersion machine revolution after adding.
700-800 rotate/min, after resin solution, add 5, 6,7, 8, 9,10, dispersing over 15min. Grinding on sand mill, after the fineness meets requirement, measure viscosity, can use toluene to adjust it to be qualified.
Fineness≤65um(fineness gage), viscosity 95-105second, coat 4cup -25℃)
Paint solid content can reach above 70%, highly cost effective, one ton resin can make about 5.8tons paint.